Frequently Asked Questions

Yes, you can order samples directly here.

Our faux stone, brick, and wood panels vary in weight depending on the panel, check product specifications for accurate information. But in general, they are close to 1 lb./sq. foot.

Yes, our panels are very easy to install. If you are not handy, any carpenter in the phone book can install our panels.

Cutting the panels is easy! You can use any wood cutting tool. Feel free to check out our numerous instructional videos for additional guidance.

Although our panels are incredibly realistic, keep in mind that they are not a stone product, we manufacture them utilizing high-density polyurethane. You can use all of our polyurethane panels around a fireplace opening, insert, or stove, provided you follow the manufacturer’s specifications for required clearances. Please adhere to your local fire codes for safety.

URESTONE faux stone panels and our other textures replicate every detail of the natural material. Each panel is hand-painted with a multi-step process to ensure that every panel is stunningly realistic.

For the most part, we do not recommend using these panels as flooring. They are to be used on walls and ceilings only.

Yes, you can put our panels on any flat surface.

Anywhere you want the look of brick, stone, or wood. URESTONE panels are perfect for inside or outside in any residential or commercial application.

After the sheets are installed, no maintenance is required!

The sizes are broken down by series. On average, our URESTONE Series is close to 48″ high x 96″ in width, the Wainscot Series is close to 42″ high x 96″ in width, and the URESTONE Lite 2’x4′ series is close to the stated 2 feet x 4 feet.

Yes. URESTONE panels are specially formulated to resist moisture, sun fading, insects, and pests.

Yes, URESTONE panels are hand-painted using high-quality exterior paints and are UV proof.

Yes, URESTONE panels can be glued to cement with construction adhesive. You can also use “Tap Con” masonry screws in each corner of the panel. The caulking we provide will hide the screw heads. This is a very common application.

That depends on which series is in question. The URESTONE Large Designer Series and URESTONE Wainscot Series are made from a combination of urethane hard-coat and high-density foam. The URESTONE Lite 2’x4′ Series is produced solely from high-density foam.

URESTONE panels are molded from real brick, stone, wood, etc—and they feel just like the real thing.

Yes, our 4′ x 8′ foot URESTONE Designer Panels and URESTONE Wainscot Series install fast and are perfect for the elements and exterior applications. They can be installed as quickly as one day.

Our URESTONE Large Designer Series and URESTONE Wainscot Series ship directly to you (or your job site) via LTL freight. The URESTONE Lite 2’x4′ Series is smaller and can be shipped out by FedEx. Shipping is an additional cost.

YES, this is the same system that we pioneered when making our outdoor water features, which have held up outdoors for well over 10 years.

Cleaning URESTONE panels is easy. For exterior applications, simply rinse them down with a garden hose. For interior applications, you can wash them with soap and water or a mild detergent.

Yes, URESTONE panels are completely waterproof and are extremely durable. When cleaning, please use only a mild detergent and make sure not to use any harsh or bleach-based cleaners. The panels can be sealed in with a polyurethane sealer for easier cleaning if needed.

Yes. We offer a 10-Year Limited Warranty for Urestone, and up-to-date details can be found on UrestonePanels.com at any time.

Yes, you can install URESTONE panels on a curved wall. Most panels will only require a little extra glue and screws. Depending on the radius and thickness of the panels, it might also be necessary to heat them up or even score the back of the panel to achieve installation.